#ifdef _ACCEL # include "module_mp_wsm5_accel.F" #else #if ( RWORDSIZE == 4 ) # define VREC vsrec # define VSQRT vssqrt #else # define VREC vrec # define VSQRT vsqrt #endif !Including inline expansion statistical function MODULE module_mp_wsm5 ! USE module_mp_radar ! REAL, PARAMETER, PRIVATE :: dtcldcr = 120. ! maximum time step for minor loops REAL, PARAMETER, PRIVATE :: n0r = 8.e6 ! intercept parameter rain REAL, PARAMETER, PRIVATE :: avtr = 841.9 ! a constant for terminal velocity of rain REAL, PARAMETER, PRIVATE :: bvtr = 0.8 ! a constant for terminal velocity of rain REAL, PARAMETER, PRIVATE :: r0 = .8e-5 ! 8 microm in contrast to 10 micro m REAL, PARAMETER, PRIVATE :: peaut = .55 ! collection efficiency REAL, PARAMETER, PRIVATE :: xncr = 3.e8 ! maritime cloud in contrast to 3.e8 in tc80 REAL, PARAMETER, PRIVATE :: xmyu = 1.718e-5 ! the dynamic viscosity kgm-1s-1 REAL, PARAMETER, PRIVATE :: avts = 11.72 ! a constant for terminal velocity of snow REAL, PARAMETER, PRIVATE :: bvts = .41 ! a constant for terminal velocity of snow REAL, PARAMETER, PRIVATE :: n0smax = 1.e11 ! maximum n0s (t=-90C unlimited) REAL, PARAMETER, PRIVATE :: lamdarmax = 8.e4 ! limited maximum value for slope parameter of rain REAL, PARAMETER, PRIVATE :: lamdasmax = 1.e5 ! limited maximum value for slope parameter of snow REAL, PARAMETER, PRIVATE :: lamdagmax = 6.e4 ! limited maximum value for slope parameter of graupel REAL, PARAMETER, PRIVATE :: dicon = 11.9 ! constant for the cloud-ice diamter REAL, PARAMETER, PRIVATE :: dimax = 500.e-6 ! limited maximum value for the cloud-ice diamter REAL, PARAMETER, PRIVATE :: n0s = 2.e6 ! temperature dependent intercept parameter snow REAL, PARAMETER, PRIVATE :: alpha = .12 ! .122 exponen factor for n0s REAL, PARAMETER, PRIVATE :: pfrz1 = 100. ! constant in Biggs freezing REAL, PARAMETER, PRIVATE :: pfrz2 = 0.66 ! constant in Biggs freezing REAL, PARAMETER, PRIVATE :: qcrmin = 1.e-9 ! minimun values for qr, qs, and qg REAL, PARAMETER, PRIVATE :: eacrc = 1.0 ! Snow/cloud-water collection efficiency REAL, SAVE :: & qc0, qck1, pidnc, & bvtr1,bvtr2,bvtr3,bvtr4,g1pbr, & g3pbr,g4pbr,g5pbro2,pvtr,eacrr,pacrr, & precr1,precr2,xmmax,roqimax,bvts1, & bvts2,bvts3,bvts4,g1pbs,g3pbs,g4pbs, & g5pbso2,pvts,pacrs,precs1,precs2,pidn0r, & pidn0s,xlv1,pacrc,pi, & rslopermax,rslopesmax,rslopegmax, & rsloperbmax,rslopesbmax,rslopegbmax, & rsloper2max,rslopes2max,rslopeg2max, & rsloper3max,rslopes3max,rslopeg3max ! ! Specifies code-inlining of fpvs function in WSM52D below. JM 20040507 ! CONTAINS !=================================================================== ! SUBROUTINE wsm5(th, q, qc, qr, qi, qs & ,den, pii, p, delz & ,delt,g, cpd, cpv, rd, rv, t0c & ,ep1, ep2, qmin & ,XLS, XLV0, XLF0, den0, denr & ,cliq,cice,psat & ,rain, rainncv & ,snow, snowncv & ,sr & ,refl_10cm, diagflag, do_radar_ref & ,has_reqc, has_reqi, has_reqs & ! for radiation ,re_cloud, re_ice, re_snow & ! for radiation ,ids,ide, jds,jde, kds,kde & ,ims,ime, jms,jme, kms,kme & ,its,ite, jts,jte, kts,kte & ) !------------------------------------------------------------------- IMPLICIT NONE !------------------------------------------------------------------- ! INTEGER, INTENT(IN ) :: ids,ide, jds,jde, kds,kde , & ims,ime, jms,jme, kms,kme , & its,ite, jts,jte, kts,kte REAL, DIMENSION( ims:ime , kms:kme , jms:jme ), & INTENT(INOUT) :: & th, & q, & qc, & qi, & qr, & qs REAL, DIMENSION( ims:ime , kms:kme , jms:jme ), & INTENT(IN ) :: & den, & pii, & p, & delz REAL, INTENT(IN ) :: delt, & g, & rd, & rv, & t0c, & den0, & cpd, & cpv, & ep1, & ep2, & qmin, & XLS, & XLV0, & XLF0, & cliq, & cice, & psat, & denr REAL, DIMENSION( ims:ime , jms:jme ), & INTENT(INOUT) :: rain, & rainncv, & sr ! for radiation connecting INTEGER, INTENT(IN):: & has_reqc, & has_reqi, & has_reqs REAL, DIMENSION(ims:ime, kms:kme, jms:jme), & INTENT(INOUT):: & re_cloud, & re_ice, & re_snow !+---+-----------------------------------------------------------------+ REAL, DIMENSION(ims:ime, kms:kme, jms:jme), INTENT(INOUT):: & ! GT refl_10cm !+---+-----------------------------------------------------------------+ REAL, DIMENSION( ims:ime , jms:jme ), OPTIONAL, & INTENT(INOUT) :: snow, & snowncv ! LOCAL VAR #ifdef XEON_OPTIMIZED_WSM5 # include "mic-wsm5-3-5-locvar.h" #else REAL, DIMENSION( its:ite , kts:kte ) :: t REAL, DIMENSION( its:ite , kts:kte, 2 ) :: qci, qrs CHARACTER*256 :: emess INTEGER :: i,j,k #endif !+---+-----------------------------------------------------------------+ REAL, DIMENSION(kts:kte):: qv1d, t1d, p1d, qr1d, qs1d, dBZ LOGICAL, OPTIONAL, INTENT(IN) :: diagflag INTEGER, OPTIONAL, INTENT(IN) :: do_radar_ref !+---+-----------------------------------------------------------------+ ! to calculate effective radius for radiation REAL, DIMENSION( kts:kte ) :: den1d REAL, DIMENSION( kts:kte ) :: qc1d REAL, DIMENSION( kts:kte ) :: qi1d REAL, DIMENSION( kts:kte ) :: re_qc, re_qi, re_qs !+---+-----------------------------------------------------------------+ #ifndef XEON_OPTIMIZED_WSM5 DO j=jts,jte DO k=kts,kte DO i=its,ite t(i,k)=th(i,k,j)*pii(i,k,j) qci(i,k,1) = qc(i,k,j) qci(i,k,2) = qi(i,k,j) qrs(i,k,1) = qr(i,k,j) qrs(i,k,2) = qs(i,k,j) ENDDO ENDDO ! Sending array starting locations of optional variables may cause ! troubles, so we explicitly change the call. CALL wsm52D(t, q(ims,kms,j), qci, qrs & ,den(ims,kms,j) & ,p(ims,kms,j), delz(ims,kms,j) & ,delt,g, cpd, cpv, rd, rv, t0c & ,ep1, ep2, qmin & ,XLS, XLV0, XLF0, den0, denr & ,cliq,cice,psat & ,j & ,rain(ims,j),rainncv(ims,j) & ,sr(ims,j) & ,ids,ide, jds,jde, kds,kde & ,ims,ime, jms,jme, kms,kme & ,its,ite, jts,jte, kts,kte & ,snow,snowncv & ) DO K=kts,kte DO I=its,ite th(i,k,j)=t(i,k)/pii(i,k,j) qc(i,k,j) = qci(i,k,1) qi(i,k,j) = qci(i,k,2) qr(i,k,j) = qrs(i,k,1) qs(i,k,j) = qrs(i,k,2) ENDDO ENDDO !+---+-----------------------------------------------------------------+ IF ( PRESENT (diagflag) ) THEN if (diagflag .and. do_radar_ref == 1) then ! WRITE(emess,*)'calling refl10cm_wsm5 ',its, jts ! CALL wrf_debug ( 0, emess ) DO I=its,ite DO K=kts,kte t1d(k)=th(i,k,j)*pii(i,k,j) p1d(k)=p(i,k,j) qv1d(k)=q(i,k,j) qr1d(k)=qr(i,k,j) qs1d(k)=qs(i,k,j) ENDDO call refl10cm_wsm5 (qv1d, qr1d, qs1d, & t1d, p1d, dBZ, kts, kte, i, j) do k = kts, kte refl_10cm(i,k,j) = MAX(-35., dBZ(k)) enddo ENDDO endif ENDIF if (has_reqc.ne.0 .and. has_reqi.ne.0 .and. has_reqs.ne.0) then do i=its,ite do k=kts,kte re_qc(k) = 2.51E-6 re_qi(k) = 10.01E-6 re_qs(k) = 25.E-6 t1d(k) = th(i,k,j)*pii(i,k,j) den1d(k)= den(i,k,j) qc1d(k) = qc(i,k,j) qi1d(k) = qi(i,k,j) qs1d(k) = qs(i,k,j) enddo call effectRad_wsm5(t1d, qc1d, qi1d, qs1d, den1d, & qmin, t0c, re_qc, re_qi, re_qs, & kts, kte, i, j) do k=kts,kte re_cloud(i,k,j) = MAX(2.51E-6, MIN(re_qc(k), 50.E-6)) re_ice(i,k,j) = MAX(10.01E-6, MIN(re_qi(k), 125.E-6)) re_snow(i,k,j) = MAX(25.E-6, MIN(re_qs(k), 999.E-6)) enddo enddo endif ! has_reqc, etc... !+---+-----------------------------------------------------------------+ ENDDO #else ! Code to call the XEON-optimized WSM5 is included here ! this also contains OpenMP directives, so they are ! removed from the driver in the case where WSM5SCHEME ! is selected. # include "mic-wsm5-3-5-callsite.h" IF ( PRESENT (diagflag) ) THEN IF (diagflag .and. do_radar_ref == 1) then !$OMP PARALLEL DO & !$OMP PRIVATE ( i,j,k,t1d,p1d,qv1d,qr1d,qs1d,dBZ ) DO j=jts,jte DO I=its,ite DO K=kts,kte t1d(k)=th(i,k,j)*pii(i,k,j) p1d(k)=p(i,k,j) qv1d(k)=q(i,k,j) qr1d(k)=qr(i,k,j) qs1d(k)=qs(i,k,j) ENDDO call refl10cm_wsm5 (qv1d, qr1d, qs1d, & t1d, p1d, dBZ, kts, kte, i, j) DO k = kts, kte refl_10cm(i,k,j) = MAX(-35., dBZ(k)) ENDDO ENDDO ENDDO !$OMP END PARALLEL DO ENDIF ENDIF #endif END SUBROUTINE wsm5 #ifndef XEON_OPTIMIZED_WSM5 !=================================================================== ! SUBROUTINE wsm52D(t, q & ,qci, qrs, den, p, delz & ,delt,g, cpd, cpv, rd, rv, t0c & ,ep1, ep2, qmin & ,XLS, XLV0, XLF0, den0, denr & ,cliq,cice,psat & ,lat & ,rain,rainncv & ,sr & ,ids,ide, jds,jde, kds,kde & ,ims,ime, jms,jme, kms,kme & ,its,ite, jts,jte, kts,kte & ,snow,snowncv & ) !------------------------------------------------------------------- IMPLICIT NONE !------------------------------------------------------------------- ! ! This code is a 5-class mixed ice microphyiscs scheme (WSM5) of the ! Single-Moment MicroPhyiscs (WSMMP). The WSMMP assumes that ice nuclei ! number concentration is a function of temperature, and seperate assumption ! is developed, in which ice crystal number concentration is a function ! of ice amount. A theoretical background of the ice-microphysics and related ! processes in the WSMMPs are described in Hong et al. (2004). ! Production terms in the WSM6 scheme are described in Hong and Lim (2006). ! All units are in m.k.s. and source/sink terms in kgkg-1s-1. ! ! WSM5 cloud scheme ! ! Coded by Song-You Hong (Yonsei Univ.) ! Jimy Dudhia (NCAR) and Shu-Hua Chen (UC Davis) ! Summer 2002 ! ! Implemented by Song-You Hong (Yonsei Univ.) and Jimy Dudhia (NCAR) ! Summer 2003 ! ! further modifications : ! semi-lagrangian sedimentation (JH,2010),hong, aug 2009 ! ==> higher accuracy and efficient at lower resolutions ! reflectivity computation from greg thompson, lim, jun 2011 ! ==> only diagnostic, but with removal of too large drops ! effective radius of hydrometeors, bae from kiaps, jan 2015 ! ==> consistency in solar insolation of rrtmg radiation ! bug fix in melting terms, bae from kiaps, nov 2015 ! ==> density of air is divided, which has not been ! ! Reference) Hong, Dudhia, Chen (HDC, 2004) Mon. Wea. Rev. ! Rutledge, Hobbs (RH83, 1983) J. Atmos. Sci. ! Hong and Lim (HL, 2006) J. Korean Meteor. Soc. ! INTEGER, INTENT(IN ) :: ids,ide, jds,jde, kds,kde , & ims,ime, jms,jme, kms,kme , & its,ite, jts,jte, kts,kte, & lat REAL, DIMENSION( its:ite , kts:kte ), & INTENT(INOUT) :: & t REAL, DIMENSION( its:ite , kts:kte, 2 ), & INTENT(INOUT) :: & qci, & qrs REAL, DIMENSION( ims:ime , kms:kme ), & INTENT(INOUT) :: & q REAL, DIMENSION( ims:ime , kms:kme ), & INTENT(IN ) :: & den, & p, & delz REAL, INTENT(IN ) :: delt, & g, & cpd, & cpv, & t0c, & den0, & rd, & rv, & ep1, & ep2, & qmin, & XLS, & XLV0, & XLF0, & cliq, & cice, & psat, & denr REAL, DIMENSION( ims:ime ), & INTENT(INOUT) :: rain, & rainncv, & sr REAL, DIMENSION( ims:ime, jms:jme ), OPTIONAL, & INTENT(INOUT) :: snow, & snowncv ! LOCAL VAR REAL, DIMENSION( its:ite , kts:kte , 2) :: & rh, & qs, & rslope, & rslope2, & rslope3, & rslopeb, & qrs_tmp, & falk, & fall, & work1 REAL, DIMENSION( its:ite , kts:kte ) :: & falkc, & fallc, & xl, & cpm, & denfac, & xni, & denqrs1, & denqrs2, & denqci, & n0sfac, & work2, & workr, & works, & work1c, & work2c REAL, DIMENSION( its:ite , kts:kte ) :: & den_tmp, & delz_tmp REAL, DIMENSION( its:ite ) :: & delqrs1, & delqrs2, & delqi REAL, DIMENSION( its:ite , kts:kte ) :: & pigen, & pidep, & psdep, & praut, & psaut, & prevp, & psevp, & pracw, & psacw, & psaci, & pcond, & psmlt INTEGER, DIMENSION( its:ite ) :: & mstep, & numdt REAL, DIMENSION(its:ite) :: tstepsnow REAL, DIMENSION(its:ite) :: rmstep REAL dtcldden, rdelz, rdtcld LOGICAL, DIMENSION( its:ite ) :: flgcld #define WSM_NO_CONDITIONAL_IN_VECTOR #ifdef WSM_NO_CONDITIONAL_IN_VECTOR REAL, DIMENSION(its:ite) :: xal, xbl #endif REAL :: & cpmcal, xlcal, diffus, & viscos, xka, venfac, conden, diffac, & x, y, z, a, b, c, d, e, & qdt, holdrr, holdrs, supcol, supcolt, pvt, & coeres, supsat, dtcld, xmi, eacrs, satdt, & vt2i,vt2s,acrfac, & qimax, diameter, xni0, roqi0, & fallsum, fallsum_qsi, xlwork2, factor, source, & value, xlf, pfrzdtc, pfrzdtr, supice, holdc, holdci ! variables for optimization REAL, DIMENSION( its:ite ) :: tvec1 REAL :: temp INTEGER :: i, j, k, mstepmax, & iprt, latd, lond, loop, loops, ifsat, n, idim, kdim ! Temporaries used for inlining fpvs function REAL :: dldti, xb, xai, tr, xbi, xa, hvap, cvap, hsub, dldt, ttp REAL :: logtr ! !================================================================= ! compute internal functions ! cpmcal(x) = cpd*(1.-max(x,qmin))+max(x,qmin)*cpv xlcal(x) = xlv0-xlv1*(x-t0c) !---------------------------------------------------------------- ! diffus: diffusion coefficient of the water vapor ! viscos: kinematic viscosity(m2s-1) ! diffus(x,y) = 8.794e-5 * exp(log(x)*(1.81)) / y ! 8.794e-5*x**1.81/y ! viscos(x,y) = 1.496e-6 * (x*sqrt(x)) /(x+120.)/y ! 1.496e-6*x**1.5/(x+120.)/y ! xka(x,y) = 1.414e3*viscos(x,y)*y ! diffac(a,b,c,d,e) = d*a*a/(xka(c,d)*rv*c*c)+1./(e*diffus(c,b)) ! venfac(a,b,c) = exp(log((viscos(b,c)/diffus(b,a)))*((.3333333))) & ! /sqrt(viscos(b,c))*sqrt(sqrt(den0/c)) ! conden(a,b,c,d,e) = (max(b,qmin)-c)/(1.+d*d/(rv*e)*c/(a*a)) ! !---------------------------------------------------------------- idim = ite-its+1 kdim = kte-kts+1 ! !---------------------------------------------------------------- ! paddint 0 for negative values generated by dynamics ! do k = kts, kte do i = its, ite qci(i,k,1) = max(qci(i,k,1),0.0) qrs(i,k,1) = max(qrs(i,k,1),0.0) qci(i,k,2) = max(qci(i,k,2),0.0) qrs(i,k,2) = max(qrs(i,k,2),0.0) enddo enddo ! !---------------------------------------------------------------- ! latent heat for phase changes and heat capacity. neglect the ! changes during microphysical process calculation ! emanuel(1994) ! do k = kts, kte do i = its, ite cpm(i,k) = cpmcal(q(i,k)) xl(i,k) = xlcal(t(i,k)) enddo enddo do k = kts, kte do i = its, ite delz_tmp(i,k) = delz(i,k) den_tmp(i,k) = den(i,k) enddo enddo ! !---------------------------------------------------------------- ! initialize the surface rain, snow ! do i = its, ite rainncv(i) = 0. if(PRESENT (snowncv) .AND. PRESENT (snow)) snowncv(i,lat) = 0. sr(i) = 0. ! new local array to catch step snow tstepsnow(i) = 0. enddo ! !---------------------------------------------------------------- ! compute the minor time steps. ! loops = max(nint(delt/dtcldcr),1) dtcld = delt/loops if(delt.le.dtcldcr) dtcld = delt ! do loop = 1,loops ! !---------------------------------------------------------------- ! initialize the large scale variables ! do i = its, ite mstep(i) = 1 flgcld(i) = .true. enddo ! ! do k = kts, kte ! do i = its, ite ! denfac(i,k) = sqrt(den0/den(i,k)) ! enddo ! enddo do k = kts, kte CALL VREC( tvec1(its), den(its,k), ite-its+1) do i = its, ite tvec1(i) = tvec1(i)*den0 enddo CALL VSQRT( denfac(its,k), tvec1(its), ite-its+1) enddo ! ! Inline expansion for fpvs ! qs(i,k,1) = fpvs(t(i,k),0,rd,rv,cpv,cliq,cice,xlv0,xls,psat,t0c) ! qs(i,k,2) = fpvs(t(i,k),1,rd,rv,cpv,cliq,cice,xlv0,xls,psat,t0c) hsub = xls hvap = xlv0 cvap = cpv ttp=t0c+0.01 dldt=cvap-cliq xa=-dldt/rv xb=xa+hvap/(rv*ttp) dldti=cvap-cice xai=-dldti/rv xbi=xai+hsub/(rv*ttp) ! this is for compilers where the conditional inhibits vectorization #ifdef WSM_NO_CONDITIONAL_IN_VECTOR do k = kts, kte do i = its, ite if(t(i,k).lt.ttp) then xal(i) = xai xbl(i) = xbi else xal(i) = xa xbl(i) = xb endif enddo do i = its, ite tr=ttp/t(i,k) logtr=log(tr) qs(i,k,1)=psat*exp(logtr*(xa)+xb*(1.-tr)) qs(i,k,1) = min(qs(i,k,1),0.99*p(i,k)) qs(i,k,1) = ep2 * qs(i,k,1) / (p(i,k) - qs(i,k,1)) qs(i,k,1) = max(qs(i,k,1),qmin) rh(i,k,1) = max(q(i,k) / qs(i,k,1),qmin) qs(i,k,2)=psat*exp(logtr*(xal(i))+xbl(i)*(1.-tr)) qs(i,k,2) = min(qs(i,k,2),0.99*p(i,k)) qs(i,k,2) = ep2 * qs(i,k,2) / (p(i,k) - qs(i,k,2)) qs(i,k,2) = max(qs(i,k,2),qmin) rh(i,k,2) = max(q(i,k) / qs(i,k,2),qmin) #else do k = kts, kte do i = its, ite tr=ttp/t(i,k) logtr=log(tr) qs(i,k,1)=psat*exp(logtr*(xa)+xb*(1.-tr)) qs(i,k,1) = min(qs(i,k,1),0.99*p(i,k)) qs(i,k,1) = ep2 * qs(i,k,1) / (p(i,k) - qs(i,k,1)) qs(i,k,1) = max(qs(i,k,1),qmin) rh(i,k,1) = max(q(i,k) / qs(i,k,1),qmin) if(t(i,k).lt.ttp) then qs(i,k,2)=psat*exp(logtr*(xai)+xbi*(1.-tr)) else qs(i,k,2)=psat*exp(logtr*(xa)+xb*(1.-tr)) endif qs(i,k,2) = min(qs(i,k,2),0.99*p(i,k)) qs(i,k,2) = ep2 * qs(i,k,2) / (p(i,k) - qs(i,k,2)) qs(i,k,2) = max(qs(i,k,2),qmin) rh(i,k,2) = max(q(i,k) / qs(i,k,2),qmin) enddo enddo #endif enddo enddo ! !---------------------------------------------------------------- ! initialize the variables for microphysical physics ! ! do k = kts, kte do i = its, ite prevp(i,k) = 0. psdep(i,k) = 0. praut(i,k) = 0. psaut(i,k) = 0. pracw(i,k) = 0. psaci(i,k) = 0. psacw(i,k) = 0. pigen(i,k) = 0. pidep(i,k) = 0. pcond(i,k) = 0. psmlt(i,k) = 0. psevp(i,k) = 0. falk(i,k,1) = 0. falk(i,k,2) = 0. fall(i,k,1) = 0. fall(i,k,2) = 0. fallc(i,k) = 0. falkc(i,k) = 0. xni(i,k) = 1.e3 enddo enddo !------------------------------------------------------------- ! Ni: ice crystal number concentraiton [HDC 5c] !------------------------------------------------------------- do k = kts, kte do i = its, ite temp = (den(i,k)*max(qci(i,k,2),qmin)) temp = sqrt(sqrt(temp*temp*temp)) xni(i,k) = min(max(5.38e7*temp,1.e3),1.e6) enddo enddo ! !---------------------------------------------------------------- ! compute the fallout term: ! first, vertical terminal velosity for minor loops !---------------------------------------------------------------- do k = kts, kte do i = its, ite qrs_tmp(i,k,1) = qrs(i,k,1) qrs_tmp(i,k,2) = qrs(i,k,2) enddo enddo call slope_wsm5(qrs_tmp,den_tmp,denfac,t,rslope,rslopeb,rslope2,rslope3, & work1,its,ite,kts,kte) ! do k = kte, kts, -1 do i = its, ite workr(i,k) = work1(i,k,1) works(i,k) = work1(i,k,2) denqrs1(i,k) = den(i,k)*qrs(i,k,1) denqrs2(i,k) = den(i,k)*qrs(i,k,2) if(qrs(i,k,1).le.0.0) workr(i,k) = 0.0 if(qrs(i,k,2).le.0.0) works(i,k) = 0.0 enddo enddo call nislfv_rain_plm(idim,kdim,den_tmp,denfac,t,delz_tmp,workr,denqrs1, & delqrs1,dtcld,1,1) call nislfv_rain_plm(idim,kdim,den_tmp,denfac,t,delz_tmp,works,denqrs2, & delqrs2,dtcld,2,1) do k = kts, kte do i = its, ite qrs(i,k,1) = max(denqrs1(i,k)/den(i,k),0.) qrs(i,k,2) = max(denqrs2(i,k)/den(i,k),0.) fall(i,k,1) = denqrs1(i,k)*workr(i,k)/delz(i,k) fall(i,k,2) = denqrs2(i,k)*works(i,k)/delz(i,k) enddo enddo do i = its, ite fall(i,1,1) = delqrs1(i)/delz(i,1)/dtcld fall(i,1,2) = delqrs2(i)/delz(i,1)/dtcld enddo do k = kts, kte do i = its, ite qrs_tmp(i,k,1) = qrs(i,k,1) qrs_tmp(i,k,2) = qrs(i,k,2) enddo enddo call slope_wsm5(qrs_tmp,den_tmp,denfac,t,rslope,rslopeb,rslope2,rslope3, & work1,its,ite,kts,kte) do k = kte, kts, -1 do i = its, ite supcol = t0c-t(i,k) n0sfac(i,k) = max(min(exp(alpha*supcol),n0smax/n0s),1.) if(t(i,k).gt.t0c.and.qrs(i,k,2).gt.0.) then !---------------------------------------------------------------- ! psmlt: melting of snow [HL A33] [RH83 A25] ! (T>T0: S->R) !---------------------------------------------------------------- xlf = xlf0 ! work2(i,k)= venfac(p(i,k),t(i,k),den(i,k)) work2(i,k)= (exp(log(((1.496e-6*((t(i,k))*sqrt(t(i,k))) & /((t(i,k))+120.)/(den(i,k)))/(8.794e-5 & *exp(log(t(i,k))*(1.81))/p(i,k)))) & *((.3333333)))/sqrt((1.496e-6*((t(i,k)) & *sqrt(t(i,k)))/((t(i,k))+120.)/(den(i,k)))) & *sqrt(sqrt(den0/(den(i,k))))) coeres = rslope2(i,k,2)*sqrt(rslope(i,k,2)*rslopeb(i,k,2)) psmlt(i,k) = (1.414e3*(1.496e-6*((t(i,k))*sqrt(t(i,k))) & /((t(i,k))+120.)/(den(i,k)) )*(den(i,k))) & /xlf*(t0c-t(i,k))*pi/2. & *n0sfac(i,k)*(precs1*rslope2(i,k,2)+precs2 & *work2(i,k)*coeres)/den(i,k) psmlt(i,k) = min(max(psmlt(i,k)*dtcld/mstep(i), & -qrs(i,k,2)/mstep(i)),0.) qrs(i,k,2) = qrs(i,k,2) + psmlt(i,k) qrs(i,k,1) = qrs(i,k,1) - psmlt(i,k) t(i,k) = t(i,k) + xlf/cpm(i,k)*psmlt(i,k) endif enddo enddo !--------------------------------------------------------------- ! Vice [ms-1] : fallout of ice crystal [HDC 5a] !--------------------------------------------------------------- do k = kte, kts, -1 do i = its, ite if(qci(i,k,2).le.0.) then work1c(i,k) = 0. else xmi = den(i,k)*qci(i,k,2)/xni(i,k) diameter = max(min(dicon * sqrt(xmi),dimax), 1.e-25) work1c(i,k) = 1.49e4*exp(log(diameter)*(1.31)) endif enddo enddo ! ! forward semi-laglangian scheme (JH), PCM (piecewise constant), (linear) ! do k = kte, kts, -1 do i = its, ite denqci(i,k) = den(i,k)*qci(i,k,2) enddo enddo call nislfv_rain_plm(idim,kdim,den_tmp,denfac,t,delz_tmp,work1c,denqci, & delqi,dtcld,1,0) do k = kts, kte do i = its, ite qci(i,k,2) = max(denqci(i,k)/den(i,k),0.) enddo enddo do i = its, ite fallc(i,1) = delqi(i)/delz(i,1)/dtcld enddo ! !---------------------------------------------------------------- ! rain (unit is mm/sec;kgm-2s-1: /1000*delt ===> m)==> mm for wrf ! do i = its, ite fallsum = fall(i,1,1)+fall(i,1,2)+fallc(i,1) fallsum_qsi = fall(i,1,2)+fallc(i,1) if(fallsum.gt.0.) then rainncv(i) = fallsum*delz(i,1)/denr*dtcld*1000. + rainncv(i) rain(i) = fallsum*delz(i,1)/denr*dtcld*1000. + rain(i) endif if(fallsum_qsi.gt.0.) then tstepsnow(i) = fallsum_qsi*delz(i,kts)/denr*dtcld*1000. & +tstepsnow(i) IF ( PRESENT (snowncv) .AND. PRESENT (snow)) THEN snowncv(i,lat) = fallsum_qsi*delz(i,kts)/denr*dtcld*1000. & +snowncv(i,lat) snow(i,lat) = fallsum_qsi*delz(i,kts)/denr*dtcld*1000. + snow(i,lat) ENDIF endif IF ( PRESENT (snowncv) ) THEN if(fallsum.gt.0.)sr(i)=snowncv(i,lat)/(rainncv(i)+1.e-12) ELSE if(fallsum.gt.0.)sr(i)=tstepsnow(i)/(rainncv(i)+1.e-12) ENDIF enddo ! !--------------------------------------------------------------- ! pimlt: instantaneous melting of cloud ice [HL A47] [RH83 A28] ! (T>T0: I->C) !--------------------------------------------------------------- do k = kts, kte do i = its, ite supcol = t0c-t(i,k) xlf = xls-xl(i,k) if(supcol.lt.0.) xlf = xlf0 if(supcol.lt.0.and.qci(i,k,2).gt.0.) then qci(i,k,1) = qci(i,k,1) + qci(i,k,2) t(i,k) = t(i,k) - xlf/cpm(i,k)*qci(i,k,2) qci(i,k,2) = 0. endif !--------------------------------------------------------------- ! pihmf: homogeneous freezing of cloud water below -40c [HL A45] ! (T<-40C: C->I) !--------------------------------------------------------------- if(supcol.gt.40..and.qci(i,k,1).gt.0.) then qci(i,k,2) = qci(i,k,2) + qci(i,k,1) t(i,k) = t(i,k) + xlf/cpm(i,k)*qci(i,k,1) qci(i,k,1) = 0. endif !--------------------------------------------------------------- ! pihtf: heterogeneous freezing of cloud water [HL A44] ! (T0>T>-40C: C->I) !--------------------------------------------------------------- if(supcol.gt.0..and.qci(i,k,1).gt.0.) then supcolt=min(supcol,50.) ! pfrzdtc = min(pfrz1*(exp(pfrz2*supcol)-1.) & ! *den(i,k)/denr/xncr*qci(i,k,1)**2*dtcld,qci(i,k,1)) pfrzdtc = min(pfrz1*(exp(pfrz2*supcolt)-1.) & *den(i,k)/denr/xncr*qci(i,k,1)*qci(i,k,1)*dtcld,qci(i,k,1)) qci(i,k,2) = qci(i,k,2) + pfrzdtc t(i,k) = t(i,k) + xlf/cpm(i,k)*pfrzdtc qci(i,k,1) = qci(i,k,1)-pfrzdtc endif !--------------------------------------------------------------- ! psfrz: freezing of rain water [HL A20] [LFO 45] ! (TS) !--------------------------------------------------------------- if(supcol.gt.0..and.qrs(i,k,1).gt.0.) then supcolt=min(supcol,50.) ! pfrzdtr = min(20.*pi**2*pfrz1*n0r*denr/den(i,k) & ! *(exp(pfrz2*supcol)-1.)*rslope(i,k,1)**7*dtcld, & ! qrs(i,k,1)) temp = rslope(i,k,1) temp = temp*temp*temp*temp*temp*temp*temp pfrzdtr = min(20.*(pi*pi)*pfrz1*n0r*denr/den(i,k) & *(exp(pfrz2*supcolt)-1.)*temp*dtcld, & qrs(i,k,1)) qrs(i,k,2) = qrs(i,k,2) + pfrzdtr t(i,k) = t(i,k) + xlf/cpm(i,k)*pfrzdtr qrs(i,k,1) = qrs(i,k,1)-pfrzdtr endif enddo enddo ! !---------------------------------------------------------------- ! update the slope parameters for microphysics computation ! do k = kts, kte do i = its, ite qrs_tmp(i,k,1) = qrs(i,k,1) qrs_tmp(i,k,2) = qrs(i,k,2) enddo enddo call slope_wsm5(qrs_tmp,den_tmp,denfac,t,rslope,rslopeb,rslope2,rslope3, & work1,its,ite,kts,kte) !------------------------------------------------------------------ ! work1: the thermodynamic term in the denominator associated with ! heat conduction and vapor diffusion ! (ry88, y93, h85) ! work2: parameter associated with the ventilation effects(y93) ! do k = kts, kte do i = its, ite ! work1(i,k,1) = diffac(xl(i,k),p(i,k),t(i,k),den(i,k),qs(i,k,1)) work1(i,k,1) = ((((den(i,k))*(xl(i,k))*(xl(i,k)))*((t(i,k))+120.) & *(den(i,k)))/(1.414e3*(1.496e-6*((t(i,k))*sqrt(t(i,k))))& *(den(i,k))*(rv*(t(i,k))*(t(i,k))))) & + p(i,k)/((qs(i,k,1))*(8.794e-5*exp(log(t(i,k))*(1.81)))) ! work1(i,k,2) = diffac(xls,p(i,k),t(i,k),den(i,k),qs(i,k,2)) work1(i,k,2) = ((((den(i,k))*(xls)*(xls))*((t(i,k))+120.)*(den(i,k)))& /(1.414e3*(1.496e-6*((t(i,k))*sqrt(t(i,k))))*(den(i,k)) & *(rv*(t(i,k))*(t(i,k)))) & + p(i,k)/(qs(i,k,2)*(8.794e-5*exp(log(t(i,k))*(1.81))))) ! work2(i,k) = venfac(p(i,k),t(i,k),den(i,k)) work2(i,k) = (exp(.3333333*log(((1.496e-6 * ((t(i,k))*sqrt(t(i,k)))) & *p(i,k))/(((t(i,k))+120.)*den(i,k)*(8.794e-5 & *exp(log(t(i,k))*(1.81))))))*sqrt(sqrt(den0/(den(i,k))))) & /sqrt((1.496e-6*((t(i,k))*sqrt(t(i,k)))) & /(((t(i,k))+120.)*den(i,k))) enddo enddo ! !=============================================================== ! ! warm rain processes ! ! - follows the processes in RH83 and LFO except for autoconcersion ! !=============================================================== ! do k = kts, kte do i = its, ite supsat = max(q(i,k),qmin)-qs(i,k,1) satdt = supsat/dtcld !--------------------------------------------------------------- ! praut: auto conversion rate from cloud to rain [HDC 16] ! (C->R) !--------------------------------------------------------------- if(qci(i,k,1).gt.qc0) then praut(i,k) = qck1*exp(log(qci(i,k,1))*((7./3.))) praut(i,k) = min(praut(i,k),qci(i,k,1)/dtcld) endif !--------------------------------------------------------------- ! pracw: accretion of cloud water by rain [HL A40] [LFO 51] ! (C->R) !--------------------------------------------------------------- if(qrs(i,k,1).gt.qcrmin.and.qci(i,k,1).gt.qmin) then pracw(i,k) = min(pacrr*rslope3(i,k,1)*rslopeb(i,k,1) & *qci(i,k,1)*denfac(i,k),qci(i,k,1)/dtcld) endif !--------------------------------------------------------------- ! prevp: evaporation/condensation rate of rain [HDC 14] ! (V->R or R->V) !--------------------------------------------------------------- if(qrs(i,k,1).gt.0.) then coeres = rslope2(i,k,1)*sqrt(rslope(i,k,1)*rslopeb(i,k,1)) prevp(i,k) = (rh(i,k,1)-1.)*(precr1*rslope2(i,k,1) & +precr2*work2(i,k)*coeres)/work1(i,k,1) if(prevp(i,k).lt.0.) then prevp(i,k) = max(prevp(i,k),-qrs(i,k,1)/dtcld) prevp(i,k) = max(prevp(i,k),satdt/2) else prevp(i,k) = min(prevp(i,k),satdt/2) endif endif enddo enddo ! !=============================================================== ! ! cold rain processes ! ! - follows the revised ice microphysics processes in HDC ! - the processes same as in RH83 and RH84 and LFO behave ! following ice crystal hapits defined in HDC, inclduing ! intercept parameter for snow (n0s), ice crystal number ! concentration (ni), ice nuclei number concentration ! (n0i), ice diameter (d) ! !=============================================================== ! rdtcld = 1./dtcld do k = kts, kte do i = its, ite supcol = t0c-t(i,k) n0sfac(i,k) = max(min(exp(alpha*supcol),n0smax/n0s),1.) supsat = max(q(i,k),qmin)-qs(i,k,2) satdt = supsat/dtcld ifsat = 0 !------------------------------------------------------------- ! Ni: ice crystal number concentraiton [HDC 5c] !------------------------------------------------------------- ! xni(i,k) = min(max(5.38e7*(den(i,k) & ! *max(qci(i,k,2),qmin))**0.75,1.e3),1.e6) temp = (den(i,k)*max(qci(i,k,2),qmin)) temp = sqrt(sqrt(temp*temp*temp)) xni(i,k) = min(max(5.38e7*temp,1.e3),1.e6) eacrs = exp(0.07*(-supcol)) ! if(supcol.gt.0) then if(qrs(i,k,2).gt.qcrmin.and.qci(i,k,2).gt.qmin) then xmi = den(i,k)*qci(i,k,2)/xni(i,k) diameter = min(dicon * sqrt(xmi),dimax) vt2i = 1.49e4*diameter**1.31 vt2s = pvts*rslopeb(i,k,2)*denfac(i,k) !------------------------------------------------------------- ! psaci: Accretion of cloud ice by rain [HDC 10] ! (TS) !------------------------------------------------------------- acrfac = 2.*rslope3(i,k,2)+2.*diameter*rslope2(i,k,2) & +diameter**2*rslope(i,k,2) psaci(i,k) = pi*qci(i,k,2)*eacrs*n0s*n0sfac(i,k) & *abs(vt2s-vt2i)*acrfac/4. endif endif !------------------------------------------------------------- ! psacw: Accretion of cloud water by snow [HL A7] [LFO 24] ! (TS, and T>=T0: C->R) !------------------------------------------------------------- if(qrs(i,k,2).gt.qcrmin.and.qci(i,k,1).gt.qmin) then psacw(i,k) = min(pacrc*n0sfac(i,k)*rslope3(i,k,2) & *rslopeb(i,k,2)*qci(i,k,1)*denfac(i,k) & ! ,qci(i,k,1)/dtcld) ,qci(i,k,1)*rdtcld) endif if(supcol .gt. 0) then !------------------------------------------------------------- ! pidep: Deposition/Sublimation rate of ice [HDC 9] ! (TI or I->V) !------------------------------------------------------------- if(qci(i,k,2).gt.0.and.ifsat.ne.1) then xmi = den(i,k)*qci(i,k,2)/xni(i,k) diameter = dicon * sqrt(xmi) pidep(i,k) = 4.*diameter*xni(i,k)*(rh(i,k,2)-1.)/work1(i,k,2) supice = satdt-prevp(i,k) if(pidep(i,k).lt.0.) then ! pidep(i,k) = max(max(pidep(i,k),satdt/2),supice) ! pidep(i,k) = max(pidep(i,k),-qci(i,k,2)/dtcld) pidep(i,k) = max(max(pidep(i,k),satdt*.5),supice) pidep(i,k) = max(pidep(i,k),-qci(i,k,2)*rdtcld) else ! pidep(i,k) = min(min(pidep(i,k),satdt/2),supice) pidep(i,k) = min(min(pidep(i,k),satdt*.5),supice) endif if(abs(prevp(i,k)+pidep(i,k)).ge.abs(satdt)) ifsat = 1 endif !------------------------------------------------------------- ! psdep: deposition/sublimation rate of snow [HDC 14] ! (V->S or S->V) !------------------------------------------------------------- if(qrs(i,k,2).gt.0..and.ifsat.ne.1) then coeres = rslope2(i,k,2)*sqrt(rslope(i,k,2)*rslopeb(i,k,2)) psdep(i,k) = (rh(i,k,2)-1.)*n0sfac(i,k) & *(precs1*rslope2(i,k,2)+precs2 & *work2(i,k)*coeres)/work1(i,k,2) supice = satdt-prevp(i,k)-pidep(i,k) if(psdep(i,k).lt.0.) then ! psdep(i,k) = max(psdep(i,k),-qrs(i,k,2)/dtcld) ! psdep(i,k) = max(max(psdep(i,k),satdt/2),supice) psdep(i,k) = max(psdep(i,k),-qrs(i,k,2)*rdtcld) psdep(i,k) = max(max(psdep(i,k),satdt*.5),supice) else ! psdep(i,k) = min(min(psdep(i,k),satdt/2),supice) psdep(i,k) = min(min(psdep(i,k),satdt*.5),supice) endif if(abs(prevp(i,k)+pidep(i,k)+psdep(i,k)).ge.abs(satdt)) & ifsat = 1 endif !------------------------------------------------------------- ! pigen: generation(nucleation) of ice from vapor [HL A50] [HDC 7-8] ! (TI) !------------------------------------------------------------- if(supsat.gt.0.and.ifsat.ne.1) then supice = satdt-prevp(i,k)-pidep(i,k)-psdep(i,k) xni0 = 1.e3*exp(0.1*supcol) roqi0 = 4.92e-11*exp(log(xni0)*(1.33)) pigen(i,k) = max(0.,(roqi0/den(i,k)-max(qci(i,k,2),0.)) & ! /dtcld) *rdtcld) pigen(i,k) = min(min(pigen(i,k),satdt),supice) endif ! !------------------------------------------------------------- ! psaut: conversion(aggregation) of ice to snow [HDC 12] ! (TS) !------------------------------------------------------------- if(qci(i,k,2).gt.0.) then qimax = roqimax/den(i,k) ! psaut(i,k) = max(0.,(qci(i,k,2)-qimax)/dtcld) psaut(i,k) = max(0.,(qci(i,k,2)-qimax)*rdtcld) endif endif !------------------------------------------------------------- ! psevp: Evaporation of melting snow [HL A35] [RH83 A27] ! (T>T0: S->V) !------------------------------------------------------------- if(supcol.lt.0.) then if(qrs(i,k,2).gt.0..and.rh(i,k,1).lt.1.) & psevp(i,k) = psdep(i,k)*work1(i,k,2)/work1(i,k,1) ! psevp(i,k) = min(max(psevp(i,k),-qrs(i,k,2)/dtcld),0.) psevp(i,k) = min(max(psevp(i,k),-qrs(i,k,2)*rdtcld),0.) endif enddo enddo ! ! !---------------------------------------------------------------- ! check mass conservation of generation terms and feedback to the ! large scale ! do k = kts, kte do i = its, ite if(t(i,k).le.t0c) then ! ! cloud water ! value = max(qmin,qci(i,k,1)) source = (praut(i,k)+pracw(i,k)+psacw(i,k))*dtcld if (source.gt.value) then factor = value/source praut(i,k) = praut(i,k)*factor pracw(i,k) = pracw(i,k)*factor psacw(i,k) = psacw(i,k)*factor endif ! ! cloud ice ! value = max(qmin,qci(i,k,2)) source = (psaut(i,k)+psaci(i,k)-pigen(i,k)-pidep(i,k))*dtcld if (source.gt.value) then factor = value/source psaut(i,k) = psaut(i,k)*factor psaci(i,k) = psaci(i,k)*factor pigen(i,k) = pigen(i,k)*factor pidep(i,k) = pidep(i,k)*factor endif ! ! rain ! ! value = max(qmin,qrs(i,k,1)) source = (-praut(i,k)-pracw(i,k)-prevp(i,k))*dtcld if (source.gt.value) then factor = value/source praut(i,k) = praut(i,k)*factor pracw(i,k) = pracw(i,k)*factor prevp(i,k) = prevp(i,k)*factor endif ! ! snow ! value = max(qmin,qrs(i,k,2)) source = (-psdep(i,k)-psaut(i,k)-psaci(i,k)-psacw(i,k))*dtcld if (source.gt.value) then factor = value/source psdep(i,k) = psdep(i,k)*factor psaut(i,k) = psaut(i,k)*factor psaci(i,k) = psaci(i,k)*factor psacw(i,k) = psacw(i,k)*factor endif ! work2(i,k)=-(prevp(i,k)+psdep(i,k)+pigen(i,k)+pidep(i,k)) ! update q(i,k) = q(i,k)+work2(i,k)*dtcld qci(i,k,1) = max(qci(i,k,1)-(praut(i,k)+pracw(i,k) & +psacw(i,k))*dtcld,0.) qrs(i,k,1) = max(qrs(i,k,1)+(praut(i,k)+pracw(i,k) & +prevp(i,k))*dtcld,0.) qci(i,k,2) = max(qci(i,k,2)-(psaut(i,k)+psaci(i,k) & -pigen(i,k)-pidep(i,k))*dtcld,0.) qrs(i,k,2) = max(qrs(i,k,2)+(psdep(i,k)+psaut(i,k) & +psaci(i,k)+psacw(i,k))*dtcld,0.) xlf = xls-xl(i,k) xlwork2 = -xls*(psdep(i,k)+pidep(i,k)+pigen(i,k)) & -xl(i,k)*prevp(i,k)-xlf*psacw(i,k) t(i,k) = t(i,k)-xlwork2/cpm(i,k)*dtcld else ! ! cloud water ! value = max(qmin,qci(i,k,1)) source=(praut(i,k)+pracw(i,k)+psacw(i,k))*dtcld if (source.gt.value) then factor = value/source praut(i,k) = praut(i,k)*factor pracw(i,k) = pracw(i,k)*factor psacw(i,k) = psacw(i,k)*factor endif ! ! rain ! value = max(qmin,qrs(i,k,1)) source = (-praut(i,k)-pracw(i,k)-prevp(i,k)-psacw(i,k))*dtcld if (source.gt.value) then factor = value/source praut(i,k) = praut(i,k)*factor pracw(i,k) = pracw(i,k)*factor prevp(i,k) = prevp(i,k)*factor psacw(i,k) = psacw(i,k)*factor endif ! ! snow ! value = max(qcrmin,qrs(i,k,2)) source=(-psevp(i,k))*dtcld if (source.gt.value) then factor = value/source psevp(i,k) = psevp(i,k)*factor endif work2(i,k)=-(prevp(i,k)+psevp(i,k)) ! update q(i,k) = q(i,k)+work2(i,k)*dtcld qci(i,k,1) = max(qci(i,k,1)-(praut(i,k)+pracw(i,k) & +psacw(i,k))*dtcld,0.) qrs(i,k,1) = max(qrs(i,k,1)+(praut(i,k)+pracw(i,k) & +prevp(i,k) +psacw(i,k))*dtcld,0.) qrs(i,k,2) = max(qrs(i,k,2)+psevp(i,k)*dtcld,0.) xlf = xls-xl(i,k) xlwork2 = -xl(i,k)*(prevp(i,k)+psevp(i,k)) t(i,k) = t(i,k)-xlwork2/cpm(i,k)*dtcld endif enddo enddo ! ! Inline expansion for fpvs ! qs(i,k,1) = fpvs(t(i,k),0,rd,rv,cpv,cliq,cice,xlv0,xls,psat,t0c) ! qs(i,k,2) = fpvs(t(i,k),1,rd,rv,cpv,cliq,cice,xlv0,xls,psat,t0c) hsub = xls hvap = xlv0 cvap = cpv ttp=t0c+0.01 dldt=cvap-cliq xa=-dldt/rv xb=xa+hvap/(rv*ttp) dldti=cvap-cice xai=-dldti/rv xbi=xai+hsub/(rv*ttp) do k = kts, kte do i = its, ite tr=ttp/t(i,k) logtr = log(tr) qs(i,k,1)=psat*exp(logtr*(xa)+xb*(1.-tr)) qs(i,k,1) = min(qs(i,k,1),0.99*p(i,k)) qs(i,k,1) = ep2 * qs(i,k,1) / (p(i,k) - qs(i,k,1)) qs(i,k,1) = max(qs(i,k,1),qmin) enddo enddo ! !---------------------------------------------------------------- ! pcond: condensational/evaporational rate of cloud water [HL A46] [RH83 A6] ! if there exists additional water vapor condensated/if ! evaporation of cloud water is not enough to remove subsaturation ! do k = kts, kte do i = its, ite ! work1(i,k,1) = conden(t(i,k),q(i,k),qs(i,k,1),xl(i,k),cpm(i,k)) work1(i,k,1) = ((max(q(i,k),qmin)-(qs(i,k,1)))/(1.+(xl(i,k)) & *(xl(i,k))/(rv*(cpm(i,k)))*(qs(i,k,1)) & /((t(i,k))*(t(i,k))))) work2(i,k) = qci(i,k,1)+work1(i,k,1) pcond(i,k) = min(max(work1(i,k,1)/dtcld,0.),max(q(i,k),0.)/dtcld) if(qci(i,k,1).gt.0..and.work1(i,k,1).lt.0.) & pcond(i,k) = max(work1(i,k,1),-qci(i,k,1))/dtcld q(i,k) = q(i,k)-pcond(i,k)*dtcld qci(i,k,1) = max(qci(i,k,1)+pcond(i,k)*dtcld,0.) t(i,k) = t(i,k)+pcond(i,k)*xl(i,k)/cpm(i,k)*dtcld enddo enddo ! ! !---------------------------------------------------------------- ! padding for small values ! do k = kts, kte do i = its, ite if(qci(i,k,1).le.qmin) qci(i,k,1) = 0.0 if(qci(i,k,2).le.qmin) qci(i,k,2) = 0.0 enddo enddo enddo ! big loops END SUBROUTINE wsm52d ! ................................................................... !-------------------------------------------------------------------------- REAL FUNCTION fpvs(t,ice,rd,rv,cvap,cliq,cice,hvap,hsub,psat,t0c) !-------------------------------------------------------------------------- IMPLICIT NONE !-------------------------------------------------------------------------- REAL t,rd,rv,cvap,cliq,cice,hvap,hsub,psat,t0c,dldt,xa,xb,dldti, & xai,xbi,ttp,tr INTEGER ice ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ttp=t0c+0.01 dldt=cvap-cliq xa=-dldt/rv xb=xa+hvap/(rv*ttp) dldti=cvap-cice xai=-dldti/rv xbi=xai+hsub/(rv*ttp) tr=ttp/t if(t.lt.ttp.and.ice.eq.1) then fpvs=psat*exp(log(tr)*(xai))*exp(xbi*(1.-tr)) else fpvs=psat*exp(log(tr)*(xa))*exp(xb*(1.-tr)) endif ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - END FUNCTION fpvs !------------------------------------------------------------------------------ subroutine slope_wsm5(qrs,den,denfac,t,rslope,rslopeb,rslope2,rslope3, & vt,its,ite,kts,kte) IMPLICIT NONE INTEGER :: its,ite, jts,jte, kts,kte REAL, DIMENSION( its:ite , kts:kte,2) :: & qrs, & rslope, & rslopeb, & rslope2, & rslope3, & vt REAL, DIMENSION( its:ite , kts:kte) :: & den, & denfac, & t REAL, PARAMETER :: t0c = 273.15 REAL, DIMENSION( its:ite , kts:kte ) :: & n0sfac REAL :: lamdar, lamdas, x, y, z, supcol integer :: i, j, k !---------------------------------------------------------------- ! size distributions: (x=mixing ratio, y=air density): ! valid for mixing ratio > 1.e-9 kg/kg. lamdar(x,y)= sqrt(sqrt(pidn0r/(x*y))) ! (pidn0r/(x*y))**.25 lamdas(x,y,z)= sqrt(sqrt(pidn0s*z/(x*y))) ! (pidn0s*z/(x*y))**.25 ! do k = kts, kte do i = its, ite supcol = t0c-t(i,k) !--------------------------------------------------------------- ! n0s: Intercept parameter for snow [m-4] [HDC 6] !--------------------------------------------------------------- n0sfac(i,k) = max(min(exp(alpha*supcol),n0smax/n0s),1.) if(qrs(i,k,1).le.qcrmin)then rslope(i,k,1) = rslopermax rslopeb(i,k,1) = rsloperbmax rslope2(i,k,1) = rsloper2max rslope3(i,k,1) = rsloper3max else rslope(i,k,1) = 1./lamdar(qrs(i,k,1),den(i,k)) rslopeb(i,k,1) = exp(log(rslope(i,k,1))*(bvtr)) rslope2(i,k,1) = rslope(i,k,1)*rslope(i,k,1) rslope3(i,k,1) = rslope2(i,k,1)*rslope(i,k,1) endif if(qrs(i,k,2).le.qcrmin)then rslope(i,k,2) = rslopesmax rslopeb(i,k,2) = rslopesbmax rslope2(i,k,2) = rslopes2max rslope3(i,k,2) = rslopes3max else rslope(i,k,2) = 1./lamdas(qrs(i,k,2),den(i,k),n0sfac(i,k)) rslopeb(i,k,2) = exp(log(rslope(i,k,2))*(bvts)) rslope2(i,k,2) = rslope(i,k,2)*rslope(i,k,2) rslope3(i,k,2) = rslope2(i,k,2)*rslope(i,k,2) endif vt(i,k,1) = pvtr*rslopeb(i,k,1)*denfac(i,k) vt(i,k,2) = pvts*rslopeb(i,k,2)*denfac(i,k) if(qrs(i,k,1).le.0.0) vt(i,k,1) = 0.0 if(qrs(i,k,2).le.0.0) vt(i,k,2) = 0.0 enddo enddo END subroutine slope_wsm5 !----------------------------------------------------------------------------- subroutine slope_rain(qrs,den,denfac,t,rslope,rslopeb,rslope2,rslope3, & vt,its,ite,kts,kte) IMPLICIT NONE INTEGER :: its,ite, jts,jte, kts,kte REAL, DIMENSION( its:ite , kts:kte) :: & qrs, & rslope, & rslopeb, & rslope2, & rslope3, & vt, & den, & denfac, & t REAL, PARAMETER :: t0c = 273.15 REAL, DIMENSION( its:ite , kts:kte ) :: & n0sfac REAL :: lamdar, x, y, z, supcol integer :: i, j, k !---------------------------------------------------------------- ! size distributions: (x=mixing ratio, y=air density): ! valid for mixing ratio > 1.e-9 kg/kg. lamdar(x,y)= sqrt(sqrt(pidn0r/(x*y))) ! (pidn0r/(x*y))**.25 ! do k = kts, kte do i = its, ite if(qrs(i,k).le.qcrmin)then rslope(i,k) = rslopermax rslopeb(i,k) = rsloperbmax rslope2(i,k) = rsloper2max rslope3(i,k) = rsloper3max else rslope(i,k) = 1./lamdar(qrs(i,k),den(i,k)) rslopeb(i,k) = rslope(i,k)**bvtr rslope2(i,k) = rslope(i,k)*rslope(i,k) rslope3(i,k) = rslope2(i,k)*rslope(i,k) endif vt(i,k) = pvtr*rslopeb(i,k)*denfac(i,k) if(qrs(i,k).le.0.0) vt(i,k) = 0.0 enddo enddo END subroutine slope_rain !------------------------------------------------------------------------------ subroutine slope_snow(qrs,den,denfac,t,rslope,rslopeb,rslope2,rslope3, & vt,its,ite,kts,kte) IMPLICIT NONE INTEGER :: its,ite, jts,jte, kts,kte REAL, DIMENSION( its:ite , kts:kte) :: & qrs, & rslope, & rslopeb, & rslope2, & rslope3, & vt, & den, & denfac, & t REAL, PARAMETER :: t0c = 273.15 REAL, DIMENSION( its:ite , kts:kte ) :: & n0sfac REAL :: lamdas, x, y, z, supcol integer :: i, j, k !---------------------------------------------------------------- ! size distributions: (x=mixing ratio, y=air density): ! valid for mixing ratio > 1.e-9 kg/kg. lamdas(x,y,z)= sqrt(sqrt(pidn0s*z/(x*y))) ! (pidn0s*z/(x*y))**.25 ! do k = kts, kte do i = its, ite supcol = t0c-t(i,k) !--------------------------------------------------------------- ! n0s: Intercept parameter for snow [m-4] [HDC 6] !--------------------------------------------------------------- n0sfac(i,k) = max(min(exp(alpha*supcol),n0smax/n0s),1.) if(qrs(i,k).le.qcrmin)then rslope(i,k) = rslopesmax rslopeb(i,k) = rslopesbmax rslope2(i,k) = rslopes2max rslope3(i,k) = rslopes3max else rslope(i,k) = 1./lamdas(qrs(i,k),den(i,k),n0sfac(i,k)) rslopeb(i,k) = rslope(i,k)**bvts rslope2(i,k) = rslope(i,k)*rslope(i,k) rslope3(i,k) = rslope2(i,k)*rslope(i,k) endif vt(i,k) = pvts*rslopeb(i,k)*denfac(i,k) if(qrs(i,k).le.0.0) vt(i,k) = 0.0 enddo enddo END subroutine slope_snow !------------------------------------------------------------------- SUBROUTINE nislfv_rain_plm(im,km,denl,denfacl,tkl,dzl,wwl,rql,precip,dt,id,iter) !------------------------------------------------------------------- ! ! for non-iteration semi-Lagrangain forward advection for cloud ! with mass conservation and positive definite advection ! 2nd order interpolation with monotonic piecewise linear method ! this routine is under assumption of decfl < 1 for semi_Lagrangian ! ! dzl depth of model layer in meter ! wwl terminal velocity at model layer m/s ! rql cloud density*mixing ration ! precip precipitation ! dt time step ! id kind of precip: 0 test case; 1 raindrop 2: snow ! iter how many time to guess mean terminal velocity: 0 pure forward. ! 0 : use departure wind for advection ! 1 : use mean wind for advection ! > 1 : use mean wind after iter-1 iterations ! ! author: hann-ming henry juang ! implemented by song-you hong ! implicit none integer im,km,id real dt real dzl(im,km),wwl(im,km),rql(im,km),precip(im) real denl(im,km),denfacl(im,km),tkl(im,km) ! integer i,k,n,m,kk,kb,kt,iter real tl,tl2,qql,dql,qqd real th,th2,qqh,dqh real zsum,qsum,dim,dip,c1,con1,fa1,fa2 real allold, allnew, zz, dzamin, cflmax, decfl real dz(km), ww(km), qq(km), wd(km), wa(km), was(km) real den(km), denfac(km), tk(km) real wi(km+1), zi(km+1), za(km+1) real qn(km), qr(km),tmp(km),tmp1(km),tmp2(km),tmp3(km) real dza(km+1), qa(km+1), qmi(km+1), qpi(km+1) ! precip(:) = 0.0 ! i_loop : do i=1,im ! ----------------------------------- dz(:) = dzl(i,:) qq(:) = rql(i,:) ww(:) = wwl(i,:) den(:) = denl(i,:) denfac(:) = denfacl(i,:) tk(:) = tkl(i,:) ! skip for no precipitation for all layers allold = 0.0 do k=1,km allold = allold + qq(k) enddo if(allold.le.0.0) then cycle i_loop endif ! ! compute interface values zi(1)=0.0 do k=1,km zi(k+1) = zi(k)+dz(k) enddo ! ! save departure wind wd(:) = ww(:) n=1 100 continue ! plm is 2nd order, we can use 2nd order wi or 3rd order wi ! 2nd order interpolation to get wi wi(1) = ww(1) wi(km+1) = ww(km) do k=2,km wi(k) = (ww(k)*dz(k-1)+ww(k-1)*dz(k))/(dz(k-1)+dz(k)) enddo ! 3rd order interpolation to get wi fa1 = 9./16. fa2 = 1./16. wi(1) = ww(1) wi(2) = 0.5*(ww(2)+ww(1)) do k=3,km-1 wi(k) = fa1*(ww(k)+ww(k-1))-fa2*(ww(k+1)+ww(k-2)) enddo wi(km) = 0.5*(ww(km)+ww(km-1)) wi(km+1) = ww(km) ! ! terminate of top of raingroup do k=2,km if( ww(k).eq.0.0 ) wi(k)=ww(k-1) enddo ! ! diffusivity of wi con1 = 0.05 do k=km,1,-1 decfl = (wi(k+1)-wi(k))*dt/dz(k) if( decfl .gt. con1 ) then wi(k) = wi(k+1) - con1*dz(k)/dt endif enddo ! compute arrival point do k=1,km+1 za(k) = zi(k) - wi(k)*dt enddo ! do k=1,km dza(k) = za(k+1)-za(k) enddo dza(km+1) = zi(km+1) - za(km+1) ! ! computer deformation at arrival point do k=1,km qa(k) = qq(k)*dz(k)/dza(k) qr(k) = qa(k)/den(k) enddo qa(km+1) = 0.0 ! call maxmin(km,1,qa,' arrival points ') ! ! compute arrival terminal velocity, and estimate mean terminal velocity ! then back to use mean terminal velocity if( n.le.iter ) then if (id.eq.1) then call slope_rain(qr,den,denfac,tk,tmp,tmp1,tmp2,tmp3,wa,1,1,1,km) else call slope_snow(qr,den,denfac,tk,tmp,tmp1,tmp2,tmp3,wa,1,1,1,km) endif if( n.ge.2 ) wa(1:km)=0.5*(wa(1:km)+was(1:km)) do k=1,km !#ifdef DEBUG ! print*,' slope_wsm3 ',qr(k)*1000.,den(k),denfac(k),tk(k),tmp(k),tmp1(k),tmp2(k),ww(k),wa(k) !#endif ! mean wind is average of departure and new arrival winds ww(k) = 0.5* ( wd(k)+wa(k) ) enddo was(:) = wa(:) n=n+1 go to 100 endif ! ! estimate values at arrival cell interface with monotone do k=2,km dip=(qa(k+1)-qa(k))/(dza(k+1)+dza(k)) dim=(qa(k)-qa(k-1))/(dza(k-1)+dza(k)) if( dip*dim.le.0.0 ) then qmi(k)=qa(k) qpi(k)=qa(k) else qpi(k)=qa(k)+0.5*(dip+dim)*dza(k) qmi(k)=2.0*qa(k)-qpi(k) if( qpi(k).lt.0.0 .or. qmi(k).lt.0.0 ) then qpi(k) = qa(k) qmi(k) = qa(k) endif endif enddo qpi(1)=qa(1) qmi(1)=qa(1) qmi(km+1)=qa(km+1) qpi(km+1)=qa(km+1) ! ! interpolation to regular point qn = 0.0 kb=1 kt=1 intp : do k=1,km kb=max(kb-1,1) kt=max(kt-1,1) ! find kb and kt if( zi(k).ge.za(km+1) ) then exit intp else find_kb : do kk=kb,km if( zi(k).le.za(kk+1) ) then kb = kk exit find_kb else cycle find_kb endif enddo find_kb find_kt : do kk=kt,km if( zi(k+1).le.za(kk) ) then kt = kk exit find_kt else cycle find_kt endif enddo find_kt kt = kt - 1 ! compute q with piecewise constant method if( kt.eq.kb ) then tl=(zi(k)-za(kb))/dza(kb) th=(zi(k+1)-za(kb))/dza(kb) tl2=tl*tl th2=th*th qqd=0.5*(qpi(kb)-qmi(kb)) qqh=qqd*th2+qmi(kb)*th qql=qqd*tl2+qmi(kb)*tl qn(k) = (qqh-qql)/(th-tl) else if( kt.gt.kb ) then tl=(zi(k)-za(kb))/dza(kb) tl2=tl*tl qqd=0.5*(qpi(kb)-qmi(kb)) qql=qqd*tl2+qmi(kb)*tl dql = qa(kb)-qql zsum = (1.-tl)*dza(kb) qsum = dql*dza(kb) if( kt-kb.gt.1 ) then do m=kb+1,kt-1 zsum = zsum + dza(m) qsum = qsum + qa(m) * dza(m) enddo endif th=(zi(k+1)-za(kt))/dza(kt) th2=th*th qqd=0.5*(qpi(kt)-qmi(kt)) dqh=qqd*th2+qmi(kt)*th zsum = zsum + th*dza(kt) qsum = qsum + dqh*dza(kt) qn(k) = qsum/zsum endif cycle intp endif ! enddo intp ! ! rain out sum_precip: do k=1,km if( za(k).lt.0.0 .and. za(k+1).lt.0.0 ) then precip(i) = precip(i) + qa(k)*dza(k) cycle sum_precip else if ( za(k).lt.0.0 .and. za(k+1).ge.0.0 ) then precip(i) = precip(i) + qa(k)*(0.0-za(k)) exit sum_precip endif exit sum_precip enddo sum_precip ! ! replace the new values rql(i,:) = qn(:) ! ! ---------------------------------- enddo i_loop ! END SUBROUTINE nislfv_rain_plm # else # include "mic-wsm5-3-5-code.h" # endif ! end of #ifndef XEON_OPTIMIZED_WSM5 ! remainder of routines are common to original and MIC version !+---+-----------------------------------------------------------------+ subroutine refl10cm_wsm5 (qv1d, qr1d, qs1d, & t1d, p1d, dBZ, kts, kte, ii, jj) IMPLICIT NONE !..Sub arguments INTEGER, INTENT(IN):: kts, kte, ii, jj REAL, DIMENSION(kts:kte), INTENT(IN):: & qv1d, qr1d, qs1d, t1d, p1d REAL, DIMENSION(kts:kte), INTENT(INOUT):: dBZ !..Local variables REAL, DIMENSION(kts:kte):: temp, pres, qv, rho REAL, DIMENSION(kts:kte):: rr, rs REAL:: temp_C DOUBLE PRECISION, DIMENSION(kts:kte):: ilamr, ilams DOUBLE PRECISION, DIMENSION(kts:kte):: N0_r, N0_s DOUBLE PRECISION:: lamr, lams LOGICAL, DIMENSION(kts:kte):: L_qr, L_qs REAL, DIMENSION(kts:kte):: ze_rain, ze_snow DOUBLE PRECISION:: fmelt_s INTEGER:: i, k, k_0, kbot, n LOGICAL:: melti DOUBLE PRECISION:: cback, x, eta, f_d REAL, PARAMETER:: R=287. !+---+ do k = kts, kte dBZ(k) = -35.0 enddo !+---+-----------------------------------------------------------------+ !..Put column of data into local arrays. !+---+-----------------------------------------------------------------+ do k = kts, kte temp(k) = t1d(k) temp_C = min(-0.001, temp(K)-273.15) qv(k) = MAX(1.E-10, qv1d(k)) pres(k) = p1d(k) rho(k) = 0.622*pres(k)/(R*temp(k)*(qv(k)+0.622)) if (qr1d(k) .gt. 1.E-9) then rr(k) = qr1d(k)*rho(k) N0_r(k) = n0r lamr = (xam_r*xcrg(3)*N0_r(k)/rr(k))**(1./xcre(1)) ilamr(k) = 1./lamr L_qr(k) = .true. else rr(k) = 1.E-12 L_qr(k) = .false. endif if (qs1d(k) .gt. 1.E-9) then rs(k) = qs1d(k)*rho(k) N0_s(k) = min(n0smax, n0s*exp(-alpha*temp_C)) lams = (xam_s*xcsg(3)*N0_s(k)/rs(k))**(1./xcse(1)) ilams(k) = 1./lams L_qs(k) = .true. else rs(k) = 1.E-12 L_qs(k) = .false. endif enddo !+---+-----------------------------------------------------------------+ !..Locate K-level of start of melting (k_0 is level above). !+---+-----------------------------------------------------------------+ melti = .false. k_0 = kts do k = kte-1, kts, -1 if ( (temp(k).gt.273.15) .and. L_qr(k) .and. L_qs(k+1) ) then k_0 = MAX(k+1, k_0) melti=.true. goto 195 endif enddo 195 continue !+---+-----------------------------------------------------------------+ !..Assume Rayleigh approximation at 10 cm wavelength. Rain (all temps) !.. and non-water-coated snow and graupel when below freezing are !.. simple. Integrations of m(D)*m(D)*N(D)*dD. !+---+-----------------------------------------------------------------+ do k = kts, kte ze_rain(k) = 1.e-22 ze_snow(k) = 1.e-22 if (L_qr(k)) ze_rain(k) = N0_r(k)*xcrg(4)*ilamr(k)**xcre(4) if (L_qs(k)) ze_snow(k) = (0.176/0.93) * (6.0/PI)*(6.0/PI) & * (xam_s/900.0)*(xam_s/900.0) & * N0_s(k)*xcsg(4)*ilams(k)**xcse(4) enddo !+---+-----------------------------------------------------------------+ !..Special case of melting ice (snow/graupel) particles. Assume the !.. ice is surrounded by the liquid water. Fraction of meltwater is !.. extremely simple based on amount found above the melting level. !.. Uses code from Uli Blahak (rayleigh_soak_wetgraupel and supporting !.. routines). !+---+-----------------------------------------------------------------+ if (melti .and. k_0.ge.kts+1) then do k = k_0-1, kts, -1 !..Reflectivity contributed by melting snow if (L_qs(k) .and. L_qs(k_0) ) then fmelt_s = MAX(0.005d0, MIN(1.0d0-rs(k)/rs(k_0), 0.99d0)) eta = 0.d0 lams = 1./ilams(k) do n = 1, nrbins x = xam_s * xxDs(n)**xbm_s call rayleigh_soak_wetgraupel (x,DBLE(xocms),DBLE(xobms), & fmelt_s, melt_outside_s, m_w_0, m_i_0, lamda_radar, & CBACK, mixingrulestring_s, matrixstring_s, & inclusionstring_s, hoststring_s, & hostmatrixstring_s, hostinclusionstring_s) f_d = N0_s(k)*xxDs(n)**xmu_s * DEXP(-lams*xxDs(n)) eta = eta + f_d * CBACK * simpson(n) * xdts(n) enddo ze_snow(k) = SNGL(lamda4 / (pi5 * K_w) * eta) endif enddo endif do k = kte, kts, -1 dBZ(k) = 10.*log10((ze_rain(k)+ze_snow(k))*1.d18) enddo end subroutine refl10cm_wsm5 !+---+-----------------------------------------------------------------+ !------------------------------------------------------------------- SUBROUTINE wsm5init(den0,denr,dens,cl,cpv,allowed_to_read) !------------------------------------------------------------------- IMPLICIT NONE !------------------------------------------------------------------- !.... constants which may not be tunable REAL, INTENT(IN) :: den0,denr,dens,cl,cpv LOGICAL, INTENT(IN) :: allowed_to_read ! pi = 4.*atan(1.) xlv1 = cl-cpv ! qc0 = 4./3.*pi*denr*r0**3*xncr/den0 ! 0.419e-3 -- .61e-3 qck1 = .104*9.8*peaut/(xncr*denr)**(1./3.)/xmyu*den0**(4./3.) ! 7.03 pidnc = pi*denr/6. ! syb ! bvtr1 = 1.+bvtr bvtr2 = 2.5+.5*bvtr bvtr3 = 3.+bvtr bvtr4 = 4.+bvtr g1pbr = rgmma(bvtr1) g3pbr = rgmma(bvtr3) g4pbr = rgmma(bvtr4) ! 17.837825 g5pbro2 = rgmma(bvtr2) ! 1.8273 pvtr = avtr*g4pbr/6. eacrr = 1.0 pacrr = pi*n0r*avtr*g3pbr*.25*eacrr precr1 = 2.*pi*n0r*.78 precr2 = 2.*pi*n0r*.31*avtr**.5*g5pbro2 xmmax = (dimax/dicon)**2 roqimax = 2.08e22*dimax**8 ! bvts1 = 1.+bvts bvts2 = 2.5+.5*bvts bvts3 = 3.+bvts bvts4 = 4.+bvts g1pbs = rgmma(bvts1) !.8875 g3pbs = rgmma(bvts3) g4pbs = rgmma(bvts4) ! 12.0786 g5pbso2 = rgmma(bvts2) pvts = avts*g4pbs/6. pacrs = pi*n0s*avts*g3pbs*.25 precs1 = 4.*n0s*.65 precs2 = 4.*n0s*.44*avts**.5*g5pbso2 pidn0r = pi*denr*n0r pidn0s = pi*dens*n0s pacrc = pi*n0s*avts*g3pbs*.25*eacrc ! rslopermax = 1./lamdarmax rslopesmax = 1./lamdasmax rsloperbmax = rslopermax ** bvtr rslopesbmax = rslopesmax ** bvts rsloper2max = rslopermax * rslopermax rslopes2max = rslopesmax * rslopesmax rsloper3max = rsloper2max * rslopermax rslopes3max = rslopes2max * rslopesmax ! !+---+-----------------------------------------------------------------+ !..Set these variables needed for computing radar reflectivity. These !.. get used within radar_init to create other variables used in the !.. radar module. xam_r = PI*denr/6. xbm_r = 3. xmu_r = 0. xam_s = PI*dens/6. xbm_s = 3. xmu_s = 0. xam_g = PI*dens/6. ! These 3 variables for graupel are set but unused. xbm_g = 3. xmu_g = 0. call radar_init !+---+-----------------------------------------------------------------+ END SUBROUTINE wsm5init ! ................................................................... REAL FUNCTION rgmma(x) !------------------------------------------------------------------- IMPLICIT NONE !------------------------------------------------------------------- ! rgmma function: use infinite product form REAL :: euler PARAMETER (euler=0.577215664901532) REAL :: x, y INTEGER :: i if(x.eq.1.)then rgmma=0. else rgmma=x*exp(euler*x) do i=1,10000 y=float(i) rgmma=rgmma*(1.000+x/y)*exp(-x/y) enddo rgmma=1./rgmma endif END FUNCTION rgmma !----------------------------------------------------------------------- subroutine effectRad_wsm5 (t, qc, qi, qs, rho, qmin, t0c, & re_qc, re_qi, re_qs, kts, kte, ii, jj) !----------------------------------------------------------------------- ! Compute radiation effective radii of cloud water, ice, and snow for ! single-moment microphysics. ! These are entirely consistent with microphysics assumptions, not ! constant or otherwise ad hoc as is internal to most radiation ! schemes. ! Coded and implemented by Soo ya Bae, KIAPS, January 2015. !----------------------------------------------------------------------- implicit none !..Sub arguments integer, intent(in) :: kts, kte, ii, jj real, intent(in) :: qmin real, intent(in) :: t0c real, dimension( kts:kte ), intent(in):: t real, dimension( kts:kte ), intent(in):: qc real, dimension( kts:kte ), intent(in):: qi real, dimension( kts:kte ), intent(in):: qs real, dimension( kts:kte ), intent(in):: rho real, dimension( kts:kte ), intent(inout):: re_qc real, dimension( kts:kte ), intent(inout):: re_qi real, dimension( kts:kte ), intent(inout):: re_qs !..Local variables integer:: i,k integer :: inu_c real, dimension( kts:kte ):: ni real, dimension( kts:kte ):: rqc real, dimension( kts:kte ):: rqi real, dimension( kts:kte ):: rni real, dimension( kts:kte ):: rqs real :: temp real :: lamdac real :: supcol, n0sfac, lamdas real :: diai ! diameter of ice in m logical :: has_qc, has_qi, has_qs !..Minimum microphys values real, parameter :: R1 = 1.E-12 real, parameter :: R2 = 1.E-6 !..Mass power law relations: mass = am*D**bm real, parameter :: bm_r = 3.0 real, parameter :: obmr = 1.0/bm_r real, parameter :: nc0 = 3.E8 !----------------------------------------------------------------------- has_qc = .false. has_qi = .false. has_qs = .false. do k = kts, kte ! for cloud rqc(k) = max(R1, qc(k)*rho(k)) if (rqc(k).gt.R1) has_qc = .true. ! for ice rqi(k) = max(R1, qi(k)*rho(k)) temp = (rho(k)*max(qi(k),qmin)) temp = sqrt(sqrt(temp*temp*temp)) ni(k) = min(max(5.38e7*temp,1.e3),1.e6) rni(k)= max(R2, ni(k)*rho(k)) if (rqi(k).gt.R1 .and. rni(k).gt.R2) has_qi = .true. ! for snow rqs(k) = max(R1, qs(k)*rho(k)) if (rqs(k).gt.R1) has_qs = .true. enddo if (has_qc) then do k=kts,kte if (rqc(k).le.R1) CYCLE lamdac = (pidnc*nc0/rqc(k))**obmr re_qc(k) = max(2.51E-6,min(1.5*(1.0/lamdac),50.E-6)) enddo endif if (has_qi) then do k=kts,kte if (rqi(k).le.R1 .or. rni(k).le.R2) CYCLE diai = 11.9*sqrt(rqi(k)/ni(k)) re_qi(k) = max(10.01E-6,min(0.75*0.163*diai,125.E-6)) enddo endif if (has_qs) then do k=kts,kte if (rqs(k).le.R1) CYCLE supcol = t0c-t(k) n0sfac = max(min(exp(alpha*supcol),n0smax/n0s),1.) lamdas = sqrt(sqrt(pidn0s*n0sfac/rqs(k))) re_qs(k) = max(25.E-6,min(0.5*(1./lamdas), 999.E-6)) enddo endif end subroutine effectRad_wsm5 !----------------------------------------------------------------------- END MODULE module_mp_wsm5 #endif